Hyundai Genesis: Convenient features of your vehicle / Trip computer
Overview
Description
The trip computer is a microcomputer-
controlled driver information system
that displays information related
to driving.
✽ NOTICE
Some driving information stored in
the trip computer (for example
Average Vehicle Speed) resets if the
battery is disconnected.
Trip Modes
.jpg)
To change the trip mode, rotate the
MOVE switch “▲ , ▼” on the steering
wheel.
Check AEB system
This warning message illuminates
if the sensor or cover is dirty or
obscured with foreign matter such
as snow. Clean the sensor or cover
by using a soft cloth.
Thi ...
✽ NOTICE
If you reset one of the tripmeter,
elapsed time, and average vehicle
speed, they will be reset all together.
Tripmeter (1)
The tripmeter is the total driving
distance since t ...
Other information:
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
4.
Pull up the lock of the SRSCM connector to disconnect the connector ...
Adjustment
Calibration (Setting up the zero angle)
Steering Wheel Angle Sensor of an absolute angle type (CAN type) measures the angle under the standard of the zero angle set.
Calibration must be performed in the following cases:
-
Replacement of the Steering Wheel Angle Speed Sensor
- ...