Other information:
Inspection
1.
Disconnect the battery(-) terminals.
2.
Remove the crash pad Lower panel.
3.
Disengage the retaining clips and remove the crash pad lower panel switch (A).
4.
Remove the leostat switch connector.
5.
Check the switch for continuity between the terminals. ...
Removal and Installation
1.
Disconnect the battery "-" terminal from the trunk room.
2.
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - "Engine Cover")
3.
Remove the VIS actuator (A).
Tightening torque :
3.9~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 Ib-ft)
4.
To ...