Other information:
Replacememt
1.
Pull down the rear door window glass to the lowest level by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the rear door belt outside weartherstrip (A) by pulling it upward.
3.
Install in the reverse order of removal.
&n ...
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and fall with lower intensive light.
1. Battery2. LIN (Local Inter ...