Other information:
Components
Connector Pin Information
No.DescriptionNo.Description1-21-2Illumination output22-3Rheostat down switch234P output4Rheostat up switch24Immobilizer5AT N output25AT S output6Oil pressure26AT R output7Low washer27AT P output8Charge28-9AT D output29-10Illumination +30MM_CAN High11-31MM_CA ...
Adjustment
Introduction
It is necessary to check and input the calibration data when
the controller is replaced as the characteristics of the internal
frictional materials (clutch pack) change due to driving.
Creation condition and calibration method
1.
In case of replacing the transfe ...