Hyundai Genesis: General Information / Specifications
Hyundai Genesis (DH) 2013-2016 Service Manual / Steering System / General Information / Specifications
| Specifications |
| ITEM | Specification | |
| Steering Gear | Type | Rcak & pinion |
| Rack stroke | 156mm | |
| Steering angle (Max.) | Inner | 43.78 ± 1.3° |
| Outer | 34.5° | |
Tightening Torques
| Item | Specification | ||
| Nm | kgf.m | ib-ft | |
| Tire wheel hub nut | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Bolt connecting steering column to universal joint | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
| Steering wheel lock nut | 39.2 ~ 49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
| Steering column mounting nuts | 12.7 ~ 17.7 | 1.3 ~ 1.8 | 9.4 ~ 13.0 |
| Tie rod end to front axle | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Steering gear box mounting bolts - RH | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Steering gear box to hose bolt | 11.8 ~ 17.7 | 1.2 ~ 1.8 | 8.7 ~ 13.0 |
| Universal joint dust cover | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescription09561-11001Steering wheel pullerRemoval of steering wheel09568-2J100Ball joint pullerRemoval of ball joint
...
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Damper Clutch Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between solenoid valve terminals. 4. Check that the resistance is within the specification. ...
Hyundai Genesis (DH) 2013-2016 Service Manual: Waist Line Molding Repair procedures
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Take care not to scratch the body surface. ...
© 2013-2024 www.hgenesisdh.com
