Hyundai Genesis: Automatic transmission operation / Shift-lock system

For your safety, the automatic transmission has a shift-lock system which prevents shifting the transmission from P (Park) into R (Reverse) unless the brake pedal is depressed.

To shift the transmission from P (Park) into R (Reverse):

1.Depress and hold the brake pedal.

2.Start the engine or place the Engine Start/Stop button in the ON position.

3.Move the shift lever.

Paddle shifter

The paddle shifter is available when the shift lever is in the D (Drive) position or the sports mode. With the shift lever in the D position The paddle shifter will operate when the vehicle ...

Shift-lock override

If the shift lever cannot be moved from the P (Park) position into R (Reverse) position with the brake pedal depressed, continue depressing the brake, and then do the following: 1.Place the ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Seat Belt Buckle Switch (BS) Description and Operation

Description The SRSCM monitors the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures

Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A). 3. Remove the ...