Hyundai Genesis: Lubrication System / Oil Pump Components and Components Location

Components

1. Oil pump (2WD)
2. Oil pump (AWD)
3. Oil pump sprocket

Oil Pump Description and Operation
Description 2-Stage variable Vane Pump improves the fuel economy by controlling the oil pressure into two stages and by optimizing the hydraulics of low/medium rpm. The oil pressure/temperatur ...

Oil Pump Repair procedures
Removal and Installation 1. Remove the lower oil pan. (Refer to Lubrication System - "Oil pan") 2. Remove the upper oil pan. 3. Remove the bolt (A) and then separate the chain with sp ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Climate Seat Unit Description and Operation


Description Comparing with the seat heat function by the existing thermic rays, Climate Control Seat functions the heating, cooling, dehumidifying by using TED. It inhales the indoor air through the blower installed at the seat cushion lower part, and supplies the air into the seat cushion ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Trunk Lid Trim Repair procedures


Replacement     • Put on gloves to prevent hand injuries.     • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. • Take care not to scratch the body surface. ...

© 2013-2025 www.hgenesisdh.com