Hyundai Genesis: Manual heating and air conditioning / Climate information screen
selection button
.jpg)
To change the screen into the climate
information screen, press the
climate information screen selection
button.
Push the OFF button of the front to
turn off the air climate control system.
However, you can still operate
the mode and air intake buttons as
long as the Engine Start/Stop button
is in th ...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the
outside (fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed co ...
Other information:
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the interior trim pieces, use a p ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OTS connector.
3.
Remove the OTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
5.
Check that the resistance is within t ...