Hyundai Genesis: Braking system / AUTO HOLD

This feature keeps the brake applied when the shift lever is in D (Drive), R (Reverse), N (Neutral) or Sports Mode with the feature enabled and when the brake pedal has been depressed to stop the vehicle.

Emergency braking
If there is a problem with the brake pedal while driving, emergency braking is possible by pulling up and holding the EPB switch. Braking is possible only while you are holding the EPB switc ...

To apply
1. Press the [AUTO HOLD] switch. The AUTO HOLD indicator will illuminate white and the system will be in the standby position. 2. When you stop the vehicle completely by depressing the br ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures


Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direc ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Alternator Schematic Diagrams


Circuit Diagram     • COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal.(High voltage: 4V or higher, low voltage: 2V or lower) • FR signal - The transistor activation signal inside t ...

© 2013-2024 www.hgenesisdh.com