.jpg)
When you move the shift lever to the
R (Reverse) position, the outside
rearview mirror(s) will rotate downwards
to aid with driving in reverse.
The position of the outside rearview
mirror switch (1) determines whether
or not the mirrors will move:
Left/Right : When either the L (Left) or
R (Right) switch is selected,
both outside rearview
mirrors will move.
Neutral : When neither switch is selected,
the outside rearview mirrors
will not move.
The outside rearview mirrors will
automatically revert to their original
positions if any of the following occur:
- The Engine Start/Stop button is
pressed to either the OFF position
or the ACC position.
- The shift lever is moved to any
position except R (Reverse).
- The remote control outside rearview
mirror switch is not selected.
Other information:
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the mounting nut (C) after removing the top cap (B).
4.
Remove the mounting bolt (E) after removing the Lower cap (D).
Instal ...
Fuse Inspection
1.
Check that the fuse holders are loosely held and that the fuses are securely fixed by the holders.
2.
Check that each fuse circuit has the exact fuse capacity.
3.
Check the fuses for any damage.
If a fuse is to be replaced, be sure to use a new ...