Other information:
Removal
1)
Put on gloves before removing/installing the drive unit.
2)
Do not install or carry a push rod, controller and wire harnesses by holding it with bare hands .
3)
Be careful when removing the push rod, the trunk may close.
1.
Disconnect the negative ( ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
warm (Driver's side) or cool (Passenger's side) position when connecting
12V to terminal 3 and grounding terminal 4.
...