Hyundai Genesis: Rear Door / Rear Door Side Weatherstrip Repair procedures
1. |
Loosen the rear door checker (B) mounting bolt. |
2. |
Detach the clips, then remove the rear door side weatherstrip (A).
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
|

|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips. |
|
|
Replacememt
1.
Pull down the rear door window glass to the lowest level by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the rear door belt outside wea ...
Component Location
1. Rear door latch
...
Other information:
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the engine under cover.
3.
Remove the crankshaft pulley (A).
Tightening torque :
284.5 ~ 304.1 N.m (29 ~ 31 kgf.m, 209.8 ~ 224.2 lb-ft)
To fix the pulley to ...
Specification
Pressure(kPa)Output Voltage(V)500.36002.511004.5
...