Hyundai Genesis: Front Propeller Shaft Assembly / Propeller Shaft Components and Components Location

Components Location

1. Propeller shaft
2. Center bearing bracket

Front Propeller Shaft Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub.     Be caref ...

Propeller Shaft Repair procedures
Inspection Inspect Flexible Coupling 1. Check the front and rear flexible couplings for cracks or damage. 2. Inspect the flexible coupling centering bushing.If the busing is damaged, replace ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Door Latch Repair procedures


Replacement 1. Remove the rear door module. (Refer to Rear Door - "Rear Door Module") 2. After loosening the mounting bolts, remove the rear door regulator (A). 3. Disconnect the rear door latch connector (B). 4. Remove the rear door latch assembly (C) by pulling it in the directio ...

Hyundai Genesis (DH) 2013-2016 Service Manual: CVVT Oil Temperature Sensor (OTS) Description and Operation


Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which m ...

© 2013-2025 www.hgenesisdh.com