Hyundai Genesis (DH): Body Electrical System / Head Up Display System
- Components and Components Location
- Description and Operation
- Head Up Display Unit Components and Components Location
- Head Up Display Unit Schematic Diagrams
- Head Up Display Unit Repair procedures
- Head Up Display Unit Troubleshooting
Removal Blind Spot Detection Warning Indicator 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A). Installation Blind Spot Detection Warning Indicator 1.
Components Location 1. Head Up Display (HUD)2. Rheostat switch3. Cluster4. Light sensor5. Windshield glass (Wedge film applied)
Other information:
Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. After loosening the nuts (4EA) holding the rear combination lamp and disconnecting the connector (A), remove the outside rear combination lamp assembly. 3. Remove the bulb (A) after turning it in the counter clock-wise direction.
Hyundai Genesis (DH) 2013-2016 Service Manual: Auto Defogging Sensor Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator,
Categories
- Manuals Home
- Hyundai Genesis Owners Manual
- Hyundai Genesis Service Manual
- Description and Operation
- Active Air Flap(AAF) Repair procedures
- Rain Sensor Repair procedures
- New on site
- Most important about car
