Hyundai Genesis: Trunk / Emergency trunk safety release

Your vehicle is equipped with an Emergency Trunk Safety Release lever located inside the trunk. When someone is inadvertently locked in the trunk, the trunk can be opened by moving the lever in the direction of the arrow and pushing the trunk open.

WARNING

• You and your passengers must be aware of the location of the Emergency Trunk Safety Release lever in this vehicle and how to open the trunk in case you are accidentally locked in the trunk.
• NEVER allow anyone to occupy the trunk of the vehicle at any time. If the trunk is partially or totally latched and the person is unable to get out, serious injury or death could occur due to lack of ventilation, exhaust fumes and rapid heat build-up, or because of exposure to cold weather conditions. The trunk is also a highly dangerous location in the event of a crash because it is not a protected occupant space but is a part of the vehicle’s crush zone.
• Your vehicle should be kept locked and the Smart Key should be kept out of the reach of children. Parents should teach their children about the dangers of playing in trunks.
• Use the release lever for emergencies only.

Power Trunk

(1) Power Trunk Main Control button (2) Power Trunk Open button (3) Power Trunk Close button (4) Power Trunk Lock button To open: 1. Make sure the shift lever is in P (Park). 2. Then ...

Smart trunk

On a vehicle equipped with a smart key, the trunk can be opened with no-touch activation using the Smart Trunk system. ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: License Lamps Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the trunk lid panel. (Refer to Body - "Trunk Lid Back Panel") 3. Remove the license lamp after disengaging the license lamp mounting clip (A) 4. Remove the license lamp assembly after disconnecting the license connec ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Rear Disc Brake Repair procedures

Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Loosen the guide rod bolt (B) and pivot the caliper up out of the way.     Do not loosen the bridge bolt (A) instead of the guide bolt (B). ...