Hyundai Genesis: Exhaust Emission Control System / Catalytic Converter Repair procedures

Hyundai Genesis (DH) 2013-2016 Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter Repair procedures

Removal

(Refer to Engine Mechanical System - "Exhaust Manifold")

Installation

(Refer to Engine Mechanical System - "Exhaust Manifold")

Catalytic Converter Description and Operation

Description The catalytic converter of the gasoline engine is equipped with a three-way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitr ...

CVVT (Continuously Variable Valve Timing) System Description and Operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

Other information:

Hyundai Genesis (DH) 2013-2016 Service Manual: Transfer Case Assembly Repair procedures

Removal In case of replacing the controller (ECU) and transfer case due to changing characteristics of the frictional materials inside the transfer case, it is necessary to check and enter the calibration data. - The calibration procedure is not required in case of r ...

Hyundai Genesis (DH) 2013-2016 Service Manual: Idler Repair procedures

Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Drive Belt") 2. Remove the drive belt idler (A). Tightening torque : 44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft) 3. To install, reverse the removal procedure. Inspection Drive belt, Idler, ...